Belling CHIM60 Spécifications télécharger pdf (Page 10)

The following instructions only apply when installing a CFM-600C in a 30" Chimney hood.

The Independent 30" Chimney hood has an adapter plate installed inside the hood. In order to install a CFM-600C fan within

a 30" Chimney hood, first remove this adapter plate, and use this plate in lieu of the plate shipped with the CFM-600C fan.

1. Remove the adapter plate from the 30" Chimney hood by removing the four (4) 10/24 nuts. (See figure 14.)

2. Unpack the CFM-600C fan (shipped separately).

3. Remove the CFM-600C fan from the mounting plate, by removing the four (4) screws holding the fan to the plate.

4. Attach the CFM-600C fan to the adapter plate previously removed from the 30" Chimney hood.

5. Insert the CFM-600C fan unit into the 30" Chimney hood using the previously removed four (4) 10/24 nuts.

INSTALLING A CFM-600C IN A 30" CHIMNEY

Separate Fan from

CFM600C Mounting Plate by

removing (4) Mounting Screws.

Discard Mounting Plate.

Remove Adapter Plate by

removing (4) 10/24 Nuts.

Attach the 600CFM fan to

the Adapter Plate (see below).

Reinstall fan assembled unit.

Attach Fan to the 30"

Chimney Hood Adapter Plate

(installed within 30" Chimney Hood).

Use previously removed

(4) Mounting screws.

Insert the Fan assembled unit

into 30" Chimney Hood.

Plug Fan Connector

into mating Connector in Hood.

Adapter Plate removed

from 30" Chimney Hood.

Figure 14.

Installing CFM-600C in a 30" Chimney

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Belling CHIM60 Spécifications Page 10