Belling CHIM60 Spécifications télécharger pdf (Page 4)

THE CHIMNEY HOOD COMES WITH AN INSTALLATION PACKAGE

WHICH INCLUDES THE FOLLOWING ITEMS

1. Ten (10) 10/24 Nuts

2. Ten (10) #10 Self Tapping Screws 2" Length

3. Ten (1) Knob

4. One (1) 10" Transition W/Damper, 36"-66" Hood (Mounted Upside Down Inside Hood) or

one (1) 8" Transition W/Damper, 30" Hood (Mounted Upside Down Inside Hood)

The Chimney Hood includes a standard “DuctCover” at a pre-specified height supplied by the

customer as part of the purchased package (shipped separately). The choice being a 12", 18" or

24" tall unit. Included with the “DuctCover” is the following hardware.

1. Eight (8) 12/24 Self Tapping Screws 7/8" Length

2. Four (4) 5/16" X 1" Bolts

STEP 1. DUCTING CONNECTION

INSTALLATION PLANNING

CHECK THE INSTALLATION LOCATION

• If your installation has been roughed-in (including ductwork and wiring), be certain

there is nothing in the way of the mounting, pipes, other wiring etc.

• If the installation has not been roughed in, check what is needed to create the framing

and mounting hardware (allthreads, nuts, etc.). Be sure the location will not interfere

with wiring, other utilities, or structural considerations.

CHOOSE THE INSTALLATION METHOD

• There are several different methods available to mount the hood: the Unistrut, Angle

Iron, Frame In, Wall Mount, Island Mount and Rough-In Plate Mount, which can

be used for both indoor and outdoor. Please check the model options for the suggested

methods of your installation. Each hood type and site requirements are presented as

follows.

• Please read the instructions in their entirety prior to installing the hood.

1. For in-hood fans, CFM1200C, use 10" round ducting

from the provided transition.

2. For in-hood CFM600C fans, use 8" round ducting

from the provided transition.

3. For remote fans, use 10" round ducting from the

provided transition to the remote fan.

4. Ducting should be as short and straight as possible

for best fan performance. SEAL ALL JOINTS WITH

DUCT TAPE.

INSTALLATION QUESTIONS? PLEASE DIAL:

1-800-7-NEVADA

1 2 3 4 5 6 7 8 9 ... 15 16

Pas de commentaire

Belling CHIM60 Spécifications Page 4