CAUTION -
TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK, OR INJURY TO
PERSONS, OBSERVE THE
FOLLOWING:
CAUTION: FOR GENERAL
VENTILATION USE ONLY. DO NOT
USE TO EXHAUST HAZARDOUS OR
EXPLOSIVE MATERIALS OR
VAPORS.
A. Installation work and electrical wiring
must be done by a qualified person
in accordance with all applicable
codes and standards, including fire-
rated construction.
B. Sufficient air is needed for proper
combustion and exhausting of gases
through the flue (chimney) of fuel
burning equipment to prevent
backdrafting. Follow the heating
equipment manufacturer’s guidelines
and safety standards such as those
published by the National Fire
Protection Association (NFPA), and
the American Society for Heating,
Refrigeration and Air Conditioning
Engineers (ASHRAE), and the local
code authorities.
C. When cutting or drilling into a wall or
ceiling, do not damage electrical
wiring and other hidden utilities.
D. Ducted fans must always be vented to
the outdoors.
E. If this unit is to be installed over a
tub or shower, it must be marked as
appropriate for the application and
be connected to a GFCI (Ground
Fault Circuit Interrupter) - protected
branch circuit.
IMPORTANT SAFETY INSTRUCTIONS FOR INSTALLATION
F. NEVER place a switch where it can
be reached from a tub or shower.
G. CAUTION - TO REDUCE THE
RISK OF FIRE, USE ONLY
METAL DUCTWORK.
H. Install this hood in accordance with
all requirements specified by the
manufacturer of your cooktop/range.
I. Install this hood using required
clearance from cooking surface to
combustible material specified in
cooktop installation instructions.
READ AND SAVE THESE INSTRUCTIONS
The high degree of craftsmanship in the construction and finish
of your hood requires careful handling to ensure proper
installation.
• Do not remove your hood from its crate until you are ready
to hang it.
• Do not store your hood anywhere other than within the box.
If it is necessary to remove your hood from the box, arrange
it on a blanket or padded area that will protect your
hood from scratches or indentations.
• Do not lift the hood by its utensil rail. Place your fingers under
the lower reveal of the hood. Grasp firmly and lift.
• Cotton gloves are preferable. They will protect the surface
from fine scratches and eliminate fingerprints.
INSTALLATION PRECAUTIONS
• Remove all rings, watches, belt buckles, and jackets
(snaps-zippers) to prevent scratch marks.
• Do not remove the plastic from your hood until the installation
process is complete. It will be necessary to remove only
a small portion on the back-side of a wall mounted hood
in order to position in place.
• Located within the hood cavity (behind the baffle filter)
are component parts and halogen bulbs.
2
(12 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels