Belling IH60XL Manuel de service télécharger pdf (Page 22)

installation

Clearances and dimensions – re-

quirements

1. No shelf or overhang of combustible

material should be closer than 650mm

above the hob.

2. There must be a minimum clearance

of 50mm between the edges of the hob

and any side walls; this clearance must

be maintained up to 420mm above the

worktop.

3. There must be a minimum clearance of

50mm between the rear edge of the hob

and the rear wall. This clearance must

be maintained up to 650mm above the

worktop.

4. When installing an extractor hood

above the hob, refer to their Manufac-

turer’s instructions.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

Pas de commentaire

Belling IH60XL Manuel de service Page 22